Standard, trial-order and OEM quantities can be reviewed separately.
DC Protection Devices
WENC PV DC Combiner Box
A populated DC combiner box for the string side of a rooftop or ground-mount array — fuses on both polarities, an isolating DC breaker for maintenance, and a 1000V surge protector, in an IP65 enclosure rated for outdoor UV exposure.
Technical overview
Core specifications
System voltageDC 1000V
Ingress protectionIP65
EnclosurePlastic, UV resistant
Ways8, 12, 18 or 24 circuits
Inputs / outputs2, 4, 7 or 10 inputs to 1 output
Dimensions297 × 256 × 137 mm
Fitted fuse10 × 38, 15A PV fuse link
Fitted fuse holder32A 1000VDC, with indicator
Fitted breaker2P 63A DC 1000V
Fitted SPD2P, 20/40kA, DC 1000V
Fitted connector1000VDC PV gland connector
Model selection note Ratings and approval scope vary by configuration.
Include the destination market, application and required rating in your inquiry so sales can match the exact model and documentation.
IP65 enclosure — water, dust and UV resistantDC fuses protecting both positive and negative polesDC isolating breaker for circuit isolation and maintenanceDC 1000V surge protectionSolar connector entry (reversible + and −) or direct fuse wiringHigh- and low-temperature tested
Product video
See the product and its application.
Short product and application footage to support technical evaluation and specification.
Commercial & documentation
Information purchasing teams expect
Commercial terms are managed by model so purchasing teams can distinguish standard supply, samples and OEM orders.
Sample cost and preparation time are confirmed with the selected model.
Standard and customised orders may use different timelines.
The applicable term is linked to product family, market and supply conditions.
Technical files
Datasheet, dimensions and certificate scope
Technical files are supplied against the selected model so ratings, dimensions and compliance scope remain clear.
PDF · Product datasheet DWG/PDF · Dimensions & installation PDF · Certificate scope
Request Technical Files Typical use
- Rooftop PV arrays
- Ground-mount string combining
- Inverter input protection
Compliance references
- Component-level standards per fitted device
- Document scope available on request
Customisation scope
- Way count and input/output configuration
- Fitted device schedule
- Enclosure marking
Related products
Other products supplied for the same installations.
DC Protection Devices
WPV-FU Photovoltaic Fuse Link
gPV fuse links in the two sizes the PV market actually uses: 10 × 38 for 1000V systems and 10 × 85 for 1500V. Both interrupt in under a millisecond and are rated for the full-range duty a string fuse has to cover.
View specifications →
DC Protection Devices
WPV32 Photovoltaic Fuse Holder
DIN-rail holders for the matching PV links, at 1000V and 1500V. The 1000V version carries a blown-fuse indicator, which is what makes a fault findable on an array without pulling every holder.
View specifications →
DC Protection Devices
WPV32-1085 Photovoltaic Fuse Base
The 1500V half of the fuse pairing: a DIN-rail base for the 10 × 85 cartridge, supplied without the fuse so the rating is chosen against the string. Where the 1000V holder carries a blown-fuse indicator, this one does not, which is worth knowing before it goes into an array that has to be faultfound from the front.
View specifications →Technical & sales support
Ready for documents, a sample or a quotation?
Choose the resource or sales route required for the next stage of product evaluation.
01 · Explore
View Catalogues
Review the existing product range before choosing a model or configuration.
Open downloads → 02 · VerifyGet Certificate Pack
Tell us the model and market so sales can match the relevant document scope.
Request documents → 03 · EvaluateRequest Samples
Share the product, rating, quantity and evaluation target for a sample discussion.
Discuss samples → 04 · SourceRequest a Quote
Send model, quantity, destination and OEM scope for a structured response.
Start an inquiry →