Metal Consumer Unit
Flush Mounted Surge Protection Consumer Unit
Where a project needs surge protection built in and the enclosure sitting flush with the wall, this is the configuration to quote.
View specifications → Consumer Units · Distribution Boards
Distribution Systems
Installer-ready metal and plastic distribution solutions for residential projects, EV charging and commercial power systems.
Representative models
Compare products in this category
Compare model purpose, core specifications and application fit, then continue to the detailed purchasing information.
Metal Consumer Unit
Surface Mounted 100A Main Switch Consumer Unit
The plain main-switch board: one 100A double-pole isolator feeding the ways, with the protective devices chosen per circuit. Surface mounted, so no wall recess is needed.
View specifications →
Metal Consumer Unit
Flush Mounted 100A Main Switch Consumer Unit
Same 100A main-switch arrangement recessed into the wall, which is what most new-build residential specifications ask for.
View specifications →
Metal Consumer Unit
Surface Mounted Surge Protection Consumer Unit
Adds a Type 2 surge protector alongside the 100A incomer, so the board arrives with transient protection already wired rather than fitted on site.
View specifications →
Metal Consumer Unit
Surface Mounted SPD Populated Consumer Unit
Fully populated: incomer, surge protection and a Type A RCBO on every outgoing way, so each circuit has its own residual-current and overcurrent protection.
View specifications →
Metal Consumer Unit
Flush Mounted SPD Populated Consumer Unit
The recessed version of the fully populated board — incomer, surge protection and per-circuit RCBOs supplied fitted and wired.
View specifications →
Metal Consumer Unit
Single Phase Fused Switch Box
A single-phase switch box pairing a 125A isolator with a 125A fuse switch, for the service position ahead of a distribution board.
View specifications →
Metal Consumer Unit
Three Phase Fused Switch Box
Three-phase equivalent of the fused switch box: a four-pole 125A isolator with a three-pole 125A fuse switch.
View specifications →
Garage / EV Consumer Unit
Surface Mounted Metal Garage Unit
A steel garage board taking a 40A or 63A Type A RCD or a 100A main switch on the incomer, with MCBs from 6A to 50A on the ways.
View specifications →
Garage / EV Consumer Unit
Flush Mounted Metal Garage Unit
The recessed version of the steel garage board, same incomer and MCB options.
View specifications →
Garage / EV Consumer Unit
Mini Metal Garage Unit
Four ways in a smaller steel box, supplied pre-populated in six fixed combinations so the whole unit can be ordered by one code.
View specifications →
Garage / EV Consumer Unit
Mini Metal EV Charging Unit
A five-way steel unit built for a single charge point: an RCBO or main switch on the incomer, a Type 2 surge protector, and the remaining ways left usable.
View specifications →
Garage / EV Consumer Unit
IP65 AL Garage Unit
Die-cast aluminium rather than steel, sealed to IP65 for outdoor mounting, in white, black or grey.
View specifications →
Garage / EV Consumer Unit
IP65 AL EV Charging Unit
The outdoor EV unit: same die-cast aluminium IP65 housing as the garage version, in five-way and eight-way sizes with surge protection fitted.
View specifications →
TP&N Distribution Board
125A TP&N Metal Distribution Board
Three-phase and neutral distribution for commercial projects. Outgoing ways, incomer and surge protection are configured per board rather than fixed.
View specifications →
TP&N Distribution Board
125A TP&N Surge Protection Distribution Board
The 125A three-phase board with a four-pole Type 2 surge protector fitted on the incomer side.
View specifications →
TP&N Distribution Board
250A TP&N Metal Distribution Board
Steps the same three-phase platform up to 250A on a three-pole main switch, for sub-mains and larger commercial boards.
View specifications →
TP&N Distribution Board
100A Compact TP&N Metal Distribution Board
A short horizontal board for two or three three-phase ways, where a full-height TP&N enclosure will not fit.
View specifications →
Plastic Distribution Box
IP20 Plastic Modular Enclosure
A small indoor enclosure in two and four way sizes, available empty or with a 100A main switch already fitted.
View specifications →
Plastic Distribution Box
IP40 Surface Mounted Plastic Distribution Box
The standard indoor plastic board, surface mounted, from 4 to 36 ways.
View specifications →
Plastic Distribution Box
IP40 Flush Mounted Plastic Distribution Box
Same indoor board recessed into the wall — the F in place of the E is the only difference in the reference.
View specifications →
Plastic Distribution Box
IP65 WHT Plastic Distribution Box
Sealed to IP65 for outdoor and washdown areas, in five sizes from 4 to 18 ways with published dimensions for each.
View specifications →
Plastic Distribution Box
IP65 WHA Plastic Distribution Box
The second IP65 plastic range, same sealed construction and outdoor rating as the WHT in a different case format.
View specifications →
Plug-in MCB Distribution Box
Single Phase Plug-in MCB Metal Distribution Box
Built around a plug-in busbar system, so breakers clip on and off without rewiring. Single phase, with both a main switch and an RCD on the incomer.
View specifications →
Plug-in MCB Distribution Box
Three Phase Plug-in MCB Metal Distribution Board
Three-phase plug-in board in five way counts, each supplied with a four-pole RCD and a three-pole main switch.
View specifications → Selection overview
Core specification range
CapabilityPre-installed busbars
CapabilitySPD-ready configurations
CapabilityUp to 250A
StandardsBS EN 61439-3 · CE · UKCA
CustomisationLogo · Packaging · Documentation
Certification
Approved to BS EN 61439-3.
Consumer Units & TP&N Distribution Boards — CE · UKCA. View the issued documents and request the certificate number and covered-model schedule.
- CE
- UKCA