Metal Consumer Unit
Flush Mounted Surge Protection Consumer Unit
Where a project needs surge protection built in and the enclosure sitting flush with the wall, this is the configuration to quote.
View product details → Residential distribution
Metal Consumer Units
Metal consumer-unit platforms for main-switch, RCD, RCBO and surge-protection configurations.
Representative models
Products in this family. 8
Open any model for technical data, commercial terms, compliance references, OEM options and available documents.
Metal Consumer Unit
Surface Mounted 100A Main Switch Consumer Unit
The plain main-switch board: one 100A double-pole isolator feeding the ways, with the protective devices chosen per circuit. Surface mounted, so no wall recess is needed.
View product details →
Metal Consumer Unit
Flush Mounted 100A Main Switch Consumer Unit
Same 100A main-switch arrangement recessed into the wall, which is what most new-build residential specifications ask for.
View product details →
Metal Consumer Unit
Surface Mounted Surge Protection Consumer Unit
Adds a Type 2 surge protector alongside the 100A incomer, so the board arrives with transient protection already wired rather than fitted on site.
View product details →
Metal Consumer Unit
Surface Mounted SPD Populated Consumer Unit
Fully populated: incomer, surge protection and a Type A RCBO on every outgoing way, so each circuit has its own residual-current and overcurrent protection.
View product details →
Metal Consumer Unit
Flush Mounted SPD Populated Consumer Unit
The recessed version of the fully populated board — incomer, surge protection and per-circuit RCBOs supplied fitted and wired.
View product details →
Metal Consumer Unit
Single Phase Fused Switch Box
A single-phase switch box pairing a 125A isolator with a 125A fuse switch, for the service position ahead of a distribution board.
View product details →
Metal Consumer Unit
Three Phase Fused Switch Box
Three-phase equivalent of the fused switch box: a four-pole 125A isolator with a three-pole 125A fuse switch.
View product details → Product selection
Specify the right configuration
01Number of usable ways
02Incomer and outgoing-device configuration
03Surface or flush mounting
04SPD requirement
Buyer evaluation checklist
Information to verify before requesting a quote.
Compare technical, commercial and compliance information against the exact model before sending a requirement to purchasing.
Model number, poles or ways, current, voltage, breaking capacity and IP rating.
Typical installations, compatible systems and selection guidance.
Applicable standards, approval type and exactly which models are covered.
Standard MOQ, trial-order policy, sample cost and preparation time.
Timelines for standard orders, OEM samples and repeat production.
Warranty term, applicable scope and claim-support information.
Logo, marking, colour, packaging, labels, manuals and catalogues.
Datasheet, dimensional drawing, wiring diagram and installation guide.
Compatible enclosures, breakers, RCDs, RCBOs, SPDs and fuse systems.
Model, quantity, market, application, approval and delivery target.
Commercial and technical support Specifications · MOQ · samples · lead time · warranty · certificate scope
Send the target model, quantity and destination market so sales can return the relevant technical and commercial package.
Available configurations
- WSMC / WFMC 100A main switch units
- WSMC-SP / WFMC-SP surge protection units
- WSMC-SR / WFMC-SR SPD populated units
- WSMC-FS / WSMC-FT fused switch boxes
Related Solutions & OEM/ODM
Standards direction
- BS EN 61439-3 · CE · UKCA
Selection guidance
Answer the next buyer question.
Technical insights link this product family to comparison, application and RFQ guidance.
How to Select a Distribution Board for a Residential or Commercial Project
A procurement-focused guide to system type, rated current, outgoing ways, protective devices, fault level, enclosure and documentation.
Read technical insight →Why Surge Protection Devices Are Integrated into Distribution Boards
A practical explanation of surge exposure, SPD type, coordination, backup protection and the information needed for an integrated board.
Read technical insight →UK Consumer Unit Configuration Guide for Distributors and Project Buyers
A structured RFQ checklist covering ways, incomer, MCB/RCCB/RCBO arrangement, SPD, enclosure, labelling and documents.
Read technical insight →